Savana 2500 V8-6.6L DSL Turbo (2008)
Drive Belt: Service and Repair
Drive Belt Replacement
Removal Procedure
1. Remove the upper radiator fan shroud. Refer to Engine Coolant Fan Upper Shroud Replacement (4.3L, 4.8L, 5.3L, 6.0L, 6.2L, 7.0L) ()Engine
Coolant Fan Upper Shroud Replacement (6.6L) () .
2. Install a 1/2-inch breaker bar into the tensioner opening and rotate the tensioner counterclockwise.
3. Remove the belt from the tensioner.
4. Slowly release the tension on the tensioner arm.
5. Remove the drive belt from the drive pulleys , if equipped with a single generator.
6. Remove the drive belt from the drive pulleys, if equipped with dual generators.
7. Inspect the drive belt for excessive cracking or any visible damage and replace if necessary.
