Savana 2500 V8-6.6L DSL Turbo (2008)
5. If required, remove the EGR bracket bolt, nut, and EGR bracket.
Installation Procedure
Notice: Refer to Fastener Notice.
1. If required, install the EGR bracket, the EGR bracket bolt, and nut.
Tighten the bolt and nut to 25 N.m (18 lb ft).
2. Install NEW intake manifold tube gaskets (1) as required.
3. Position the EGR valve (3) to the EGR cooler tube (4).
4. Install the EGR valve to EGR cooler tube bolts (2).
Tighten the bolts to 20 N.m (15 lb ft).
5. Install the EGR valve/cooler.
