Savana 2500 V8-6.6L DSL Turbo (2008)
Fuel Pressure Sensor/Switch: Service and Repair
Fuel Injection Fuel Rail Fuel Pressure Sensor Replacement
Removal Procedure
1. Remove the engine cover.
2. Remove the exhaust gas recirculation (EGR) cooler tube.
3. Disconnect the fuel rail pressure sensor electrical connector (1).
4. Prior to removal, clean the fuel pressure sensor and surrounding area thoroughly with solvent, such as GM P/N 12377981 (Canadian P/N
10953463) or equivalent.
5. Using compressed air, thoroughly blow dry the sensor and surrounding area.
6. Remove the fuel pressure sensor (3).
Installation Procedure