Savana 2500 V8-6.6L DSL Turbo (2008)
Notice: Refer to Fastener Notice.
1. Install the fuel pressure sensor (3).
Tighten the sensor to 70 N.m (52 lb ft).
2. Connect the fuel rail pressure sensor electrical connector (1).
3. Install the EGR cooler tube.
4. Prime the fuel system. Refer to Fuel System Priming.
5. Start the engine. If the engine stalls, repeat the above step.
6. Once the engine starts, inspect for fuel leaks.
7. Install the engine cover.