Savana 2500 V8-6.6L DSL Turbo (2008)
8. Adjust the valve lash to 0.3 mm (0.012 in). Refer to Valve Clearance Adjustment Specifications (See: Engine, Cooling and
Exhaust/Engine/Specifications/Valve Clearance Adjustment Specifications) to determine which valves can be adjusted when the engine is at TDC.
Notice: Refer to Fastener Notice .
9. Tighten the lock nut.
Tighten nut to 22 N.m (16 lb ft).
10. Rotate the crankshaft one revolution in order to bring the number 1 cylinder to TDC of the exhaust stroke.
11. Loosen the valve adjusting screws.
12. Insert a feeler gage between the tip of the rocker arm and the valve bridge.