Savana 2500 V8-6.6L DSL Turbo (2008)
Remove the Brown Wire (CKT 441) from in-line Front Headliner Harness to Body Harness Connector X205 (16-Way Black Connector) (2) in
illustration shown above from Cavity A and install into Cavity H.
Install the right front windshield garnish molding. Refer to Windshield Garnish Molding Replacement in SI.
Reprogram the BCM with the latest software available in TIS2WEB.
Verify that the condition has been corrected.
Warranty Information