Savana 2500 V8-6.6L DSL Turbo (2008)
Alternator: Service and Repair
Generator Replacement (6.6L)
Generator Replacement (6.6L)
Removal Procedure
Caution: Refer to Battery Disconnect Caution.
1. Remove the upper fan shroud.
2. Remove the drive belt.
3. Remove the generator bolts (1).
4. Remove the generator front support bracket attached to generator bracket and generator.
5. Position the generator to access wiring.
6. Remove the positive battery cable from the generator, perform the following:
*
Slide the boot down to access the terminal stud.
*
Remove the positive cable nut.
*
Remove the positive cable.
7. Disconnect the generator electrical connector.
8. Remove the generator (2).
Installation Procedure
1. Install generator to engine.
2. Connect the generator electrical connector.
