Savana 2500 V8-6.6L DSL Turbo (2008)
Power Steering Pump Seal: Service and Repair
Power Steering Pump Shaft Seal Replacement
Removal Procedure
1. Remove the power steering pump. Refer to Power Steering Pump Replacement (4.8L, 5.3L, 6.0L) (See: Service and Repair)Power Steering Pump
Replacement (6.6L Diesel) (See: Service and Repair)Power Steering Pump Replacement (4.3L) (See: Service and Repair) .
Important: Protect the drive shaft with a shim stock.
2. Cut the seal with a chisel in order to remove it.
Installation Procedure
1. Lubricate the seal with power steering fluid.
2. Install the seal using a deep socket.
3. Install the power steering pump. Refer to Power Steering Pump Replacement (4.8L, 5.3L, 6.0L) (See: Service and Repair)Power Steering Pump
Replacement (6.6L Diesel) (See: Service and Repair)Power Steering Pump Replacement (4.3L) (See: Service and Repair) .