Savana 2500 V8-6.6L DSL Turbo (2008)
7. Connect the outer tie rod to the steering knuckle.
8. Install the outer tie rod to the steering knuckle retaining nut.
Tighten the nut to 63 N.m (47 lb ft).
9. Remove the safety stand.
10. Install the wheel hub and bearing. Refer to Front Wheel Hub, Bearing, and Seal Replacement (RWD) (See: Wheel Hub/Service and Repair)Front
Wheel Hub, Bearing, and Seal Replacement (4WD) (See: Wheel Hub/Service and Repair) .
11. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation (See: Wheels and Tires/Service and Repair) .
12. Lower the vehicle .