Savana 2500 V8-6.6L DSL Turbo (2008)
3. If equipped with the auxiliary transmission oil cooler, remove the outlet pipe from the auxiliary cooler pipe.
4. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
5. Disconnect the transmission oil cooler lines from the transmission. Refer to Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting
Disconnection and Connection (See: ) .
6. Remove the oil cooler lines from the transmission.
7. Remove the oil cooler lines from the clips on the frame rail.
Important: Note the routing of the transmission lines to ensure proper installation.
8. Remove the cooler lines from the vehicle.
Installation Procedure
