Savana 2500 V8-6.6L DSL Turbo (2008)
Axle Shaft: Service and Repair
Rear Axle Shaft Replacement (9.75 Inch Axle W/RPO JL4)
Rear Axle Shaft Replacement (9.75 Inch Axle W/RPO JL4)
Removal Procedure
1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair)
.
3. Remove the rear wheel speed sensor. Refer to Wheel Speed Sensor Replacement (2WD) Wheel Speed Sensor Replacement (4WD) .
4. Remove the brake caliper bracket. Refer to Rear Brake Caliper Bracket Replacement (15/25 Series) Rear Brake Caliper Bracket Replacement (35
Series) .
5. Remove the rear axle housing cover and the gasket. Refer to Rear Axle Housing Cover and Gasket Replacement (8.6 Inch Axle) (See: Differential
Assembly/Differential Cover/Service and Repair/Rear Axle Housing Cover and Gasket Replacement (8.6 Inch Axle))Rear Axle Housing Cover
and Gasket Replacement (9.75, 10.5 and 10.75 Inch Axles) (See: Differential Assembly/Differential Cover/Service and Repair/Rear Axle Housing
Cover and Gasket Replacement (9.75, 10.5 and 10.75 Inch Axles)) .
6. Remove the pinion shaft locking bolt.
7. On axles without a locking differential, remove the pinion shaft.