Savana 2500 V8-6.6L DSL Turbo (2008)
Flex Plate: Service and Repair
Engine Flywheel Housing Replacement
Engine Flywheel Housing Replacement
Special Tools
J 37228 Seal Cutter
Removal Procedure
1. Remove the engine cover. Refer to Engine Cover Replacement .
2. Remove the upper oil pan. Refer to Upper Oil Pan Replacement (See: Engine, Cooling and Exhaust/Engine/Engine Lubrication/Oil Pan/Service
and Repair/Upper Oil Pan Replacement) .
3. Remove the left and right exhaust pipes. Refer to Exhaust Pipe Replacement - Left Side (6.6L (LMM)) () and Exhaust Pipe Replacement - Right
Side (6.6L (LMM)) () .
4. Remove the turbocharger oil return pipe nuts from the top of the flywheel housing.
5. Remove the turbocharger oil return pipe studs from the flywheel housing, if necessary.
6. Remove the engine gas recirculation (EGR) cooling pipe. Refer to Exhaust Gas Recirculation Valve Cooler Replacement .
7. Remove the oil cooler adapter nuts from the side of the flywheel housing.
8. Remove the oil cooler adapter studs from the flywheel housing, if necessary.
Important: The upper oil pan must be removed before removing the flywheel housing.
9. Remove the flywheel housing bolts.
10. Separate the flywheel housing from the cylinder block using the J 37228 .
11. Remove the flywheel housing.