Savana 2500 V8-6.6L DSL Turbo VIN 6 (2007)
Rear Door Striker: Service and Repair
Rear Door Latch Striker Replacement - Upper
REAR DOOR LATCH STRIKER REPLACEMENT - UPPER
REMOVAL PROCEDURE
1. Remove the rear door opening frame garnish molding.
2. Remove the bolts (3) that retain the rear door upper striker (2) to the door opening.
3. Remove the rear door upper striker (2) from the door opening.
INSTALLATION PROCEDURE
1. Install the rear door upper striker (2) to the door opening.
2. NOTE: Refer to Fastener Notice.
Install the bolts (3) in order to retain the rear door upper striker (3) to the door opening.
Tighten the rear door upper striker retaining bolts to 10 N.m (89 lb in).
3. Install the rear door opening frame garnish molding.
