Savana 2500 V8-6.6L DSL Turbo VIN 6 (2007)
Brake Pedal Assy: Service and Repair
Brake Pedal Assembly Replacement
Removal Procedure
1. Disconnect the electrical connector (2).
2. Remove the pushrod retaining clip (5).
3. Remove the stop lamp switch (3) and the pushrod (4) from the brake pedal stud (1).
4. Remove the 4 nuts from the brake pedal bracket.
5. Remove the bolt holding the brake pedal assembly to the cowl.
6. Remove the brake pedal.
Installation Procedure