Savana 2500 V8-6.6L DSL Turbo VIN 6 (2007)
2. Install the booster assembly.
Notice: Refer to Fastener Notice.
3. Install the 4 booster to bulkhead nuts.
Tighten the nuts to 36 N.m (26 lb ft).
4. Install the stop lamp switch.
5. Install the master cylinder.
6. Connect the power brake booster outlet hose, the steering gear inlet hose, and the power brake booster inlet hose.
^
Tighten the power brake booster inlet hose to 28 N.m (20 lb ft).
^
Tighten the steering gear inlet hose to 28 N.m (20 lb ft).
7. Bleed the hydraulic booster system. Refer to Power Steering System Bleeding.
8. Release the park brake and unblock the wheels.