Savana 2500 V8-6.6L DSL Turbo VIN 6 (2007)
Lifter / Lash Adjuster: Service and Repair
Valve Lifter Replacement
Removal Procedure
1. Remove the cylinder head.
2. Loosen the valve lifter guide hold down bracket bolts.
3. Remove the valve lifter guide hold down brackets.
4. Remove the valve lifter guides.
5. Remove the valve lifters.
Installation Procedure
1. Apply clean engine oil to the lifters.
2. Install the valve lifter.
3. Install the valve lifter guides.
4. Install the valve lifter guide hold down brackets.
Notice: Refer to Fastener Notice.
5. Install the valve lifter guide hold down bracket bolt.
Tighten the bolt to 11 N.m (97 lb in).
6. Install the cylinder head.