Savana 2500 V8-6.6L DSL Turbo VIN 6 (2007)
Harmonic Balancer - Crankshaft Pulley: Service and Repair
Crankshaft Balancer Installation
Crankshaft Balancer Installation
Tools Required
J 44643 Flywheel Hold Tool
1. Lightly lubricate the crankshaft balancer internal hub with engine oil.
2. Install the crankshaft balancer to the crankshaft.
3. Lightly lubricate the crankshaft balancer bolt with engine oil.
Notice: Refer to Fastener Notice.
4. Install the crankshaft balancer bolt and washer.
1. Tighten the bolt to 100 N.m (74 lb ft) on the first pass.
2. Tighten the bolt an additional 105 degrees.
5. Remove the J 44643.
