Savana 2500 V8-6.6L DSL Turbo VIN 6 (2007)
1. Apply a 2-3 mm (0.79-0.118 in) wide by 0.5-1.5 mm (0.02-0.06 in) bead of sealant to the upper oil pan mating surfaces. Refer to Sealers,
Adhesives, and Lubricants.
2. Apply a 2-3 mm (0.79-0.118 in) wide by 0.5-1.5 mm (0.02-0.06 in) bead of sealant to the flywheel housing sealing surface. Refer to Sealers,
Adhesives, and Lubricants.
3. Install the upper oil pan to the engine block.
Notice: Refer to Fastener Notice.
4. Install any brackets and the upper oil pan bolts.