Savana 2500 V8-6.6L DSL Turbo VIN 6 (2007)
13. Install the 2 rear intake manifold tube bolts (3).
Tighten the bolt to 25 N.m (18 lb ft).
14. Install the engine wiring harness clip bolt (1) at the rear of the intake manifold tube.
Tighten the bolt to 15 N.m (11 lb ft).
15. Install the positive battery cable to the IAH stud.
16. Install the positive battery cable nut at the IAH.
Tighten the nut to 10 N.m (89 lb ft).
17. Position the positive battery cable boot.
18. Install the front intake manifold tube bolt.
Tighten the bolt to 15 N.m (11 lb ft).