Savana 2500 V8-6.6L DSL Turbo VIN 6 (2007)
Valve Guide Seal: Service and Repair
Valve Stem Oil Seal and Valve Spring Replacement
Tools Required
^
J 8062 Valve Spring Compressor
^
J 26999-20 Valve Stem Oil Seal Remover
^
J 44640 Valve Stem Seal Installer
Removal Procedure
Caution: Compressed valve springs have high tension against the valve spring compressor. Valve springs that are not properly compressed by
or released from the valve spring compressor can be ejected from the valve spring compressor with intense force. Use care when compressing
or releasing the valve spring with the valve spring compressor and when removing or installing the valve stem keys. Failing to use care may
cause personal injury.
1. Remove the cylinder head.
2. Using the J 8062, compress the valve spring.
3. Remove the valve keys (1) from the valve stem.
4. Remove the J 8062 from the cylinder head.
5. Remove the valve spring upper seat (2).
6. Remove the valve spring (3).
7. Remove the valve stem oil seal (4) using the J 26999-20.
8. Remove the valve spring lower seat (5).
9. Continue removing the necessary components using the above procedure.
Installation Procedure
