Savana 2500 V8-6.6L DSL Turbo VIN 6 (2007)
Timing Cover: Service and Repair
Engine Front Cover Replacement
Tools Required
J 37228 Seal Cutter
Removal Procedure
1. Remove the thermostat bypass pipe.
2. Remove the upper oil pan.
3. Remove the idler pulley.
4. Remove the water pump.
5. Remove the crankshaft balancer.
6. Remove the engine oil fill tube bolts.
7. Remove the engine oil fill tube.
8. Remove the crankshaft position sensor bolt.
9. Remove the crankshaft position sensor.
10. Remove the engine front cover bolts.
11. Separate the engine front cover from the cylinder block using J 37228.
12. Remove the engine front cover.
Installation Procedure