Savana 2500 V8-6.6L DSL Turbo VIN 6 (2007)
5. Install the engine front cover bolts.
Tighten the engine front cover bolts to 25 N.m (18 lb ft).
6. Install a new O-ring to the crankshaft position sensor spacer.
7. Lubricate the O-ring with engine oil.
8. Install the crankshaft position sensor spacer.
9. Install the crankshaft position sensor spacer bolts.
Tighten the crankshaft position sensor spacer bolts to 10 N.m (89 lb in).
10. Install a new O-ring to the crankshaft position sensor.
11. Lubricate the O-ring with engine oil.
12. Install the crankshaft position sensor.
13. Install the crankshaft position sensor bolt.
Tighten the crankshaft position sensor bolt to 10 N.m (89 lb in).
14. Install the engine oil fill tube.
15. Install the water pump.
16. Install the crankshaft balancer.
17. Install the idler pulley.
18. Install the upper oil pan.
19. Install the thermostat bypass pipe.
