Savana 2500 V8-6.6L DSL Turbo VIN 6 (2007)
Backup Light Bulb: Service and Repair
BACKUP LAMP BULB REPLACEMENT
REMOVAL PROCEDURE
1. Remove the screws the lens to the lamp assembly.
2. Remove the lens from the lamp assembly.
3. Gently push in on the bulb and turn the bulb 1/4 turn counterclockwise.
4. Remove the bulb from the socket.
INSTALLATION PROCEDURE
1. Install the bulb to the socket.
2. Gently push in on the bulb and turn the bulb 1/4 turn clockwise.
3. Install the lens to the lamp assembly.
4. NOTE: Refer to Fastener Notice.
Install the screws in order to retain the lens to the lamp assembly.
Tighten the screws to 1.5 N.m (13 lb in).
