Savana 2500 V8-6.6L DSL Turbo VIN 6 (2007)
Tail Lamp: Service and Repair
Back Body Opening Side Applique and Tail Lamp Replacement
Back Body Opening Side Applique and Tail Lamp Replacement
Removal Procedure
1. Remove the screws that retain the upper quarter panel applique to the body.
2. Remove the nuts that retain the upper quarter panel applique to the body.
3. Remove the upper quarter panel applique from the vehicle.
Installation Procedure
1. Install the upper quarter panel applique to the vehicle.
Notice: Refer to Fastener Notice.
2. Install the upper quarter panel applique retaining nut to the body.
Tighten the nut that retains the upper quarter panel applique to 6 N.m (53 lb in).
3. Install the upper quarter panel applique screw to the body.
Tighten the screw to 3 N.m (27 lb in).