Savana 2500 V8-6.6L DSL Turbo VIN 6 (2007)
Oil Pressure Sensor: Service and Repair
Engine Oil Pressure Sensor and/or Switch Replacement
Tools Required
J 41712 Oil Pressure Switch Socket
Removal Procedure
Important: Clean the area around the sensor. Do not allow debris to enter the engine.
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Disconnect the engine harness electrical connector (2) from the oil pressure sensor.
3. Using the J 41712, remove the oil pressure sensor (1).
Installation Procedure