Savana 2500 V8-6.6L DSL Turbo VIN 6 (2007)
Idler Arm: Service and Repair
Idler Arm Replacement
Tools Required
J 43631 Ball Joint Remover
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the idler arm to relay rod retaining nut.
Discard the nut.
3. Disconnect the idler arm from the relay rod using the J 43631 .
4. Remove the idler arm to frame mounting bolts.
5. Remove the idler arm from the vehicle.
Installation Procedure