Savana 2500 V8-6.6L DSL Turbo VIN 6 (2007)
10. Remove the inner boot seal (4).
11. Remove the steering shaft seal (3) from the adapter and bearing assembly (1).
12. Remove the shaft seal retainer (2) from the adapter and bearing assembly (1).
13. Remove the adapter and bearing assembly (1) from the steering shaft assembly.
14. Remove the steering shaft assembly (1) from the steering column support assembly (2) and the steering column jacket assembly (3).
15. Remove the 4 TORX(R) head screws (1) from the support assembly (2).
16. Discard the 4 TORX(R) head screws (1).
17. Remove the support assembly (2) from the jacket assembly (3).
Installation Procedure
