Savana 2500 V8-6.6L DSL Turbo VIN 6 (2007)
23. Insert the race and upper shaft assembly (1) into J 41688 .
24. Insert J 41688 into a vise.
25. Rotate the driver 90 degrees in the counterclockwise direction in order to disengage the centering sphere from the race and upper shaft assembly.
26. Remove the race and upper shaft assembly (1) from J 41688 .
27. Remove the shaft preload spring and the centering sphere from J 41688 .
28. If necessary, discard the old centering sphere and the old shaft preload spring.
29. Remove the 4 TORX(R) head screws (2) from the steering column support assembly (1).
30. Discard the 4 TORX(R) head screws.
31. Remove the steering column support assembly (1) from the steering column jacket assembly.
