Savana 2500 V8-6.6L DSL Turbo VIN 6 (2007)
6. Remove the lower intermediate shaft to the intermediate shaft bearing retaining bolt.
7. Disconnect the lower intermediate shaft from the intermediate shaft bearing.
8. Remove the lower intermediate shaft from the vehicle.
Installation Procedure
1. Install the lower intermediate shaft to the vehicle.
2. Connect the lower intermediate shaft to the intermediate shaft bearing.
Notice: Refer to Fastener Notice .
3. Install the lower intermediate shaft to the intermediate shaft bearing retaining bolt.
Tighten the bolt to 30 N.m (22 lb ft).
4. Align the marks made at removal and install the lower intermediate shaft to the power steering gear.
5. Install the lower intermediate shaft to the power steering gear retaining bolt.
Tighten the bolt to 61 N.m (45 lb ft).
6. Lower the vehicle.
