Savana 2500 V8-6.6L DSL Turbo VIN 6 (2007)
2. If tilt column, install the following parts onto the steering column shaft assembly:
1. Lubricate the inner race (1) with GM P/N 12345718 (Canadian P/N 10953516).
2. The inner race (1)
3. The upper bearing inner race seat (2)
4. The upper bearing spring (3)
5. Lubricate the turn signal cancel cam assembly (4) with GM P/N 12377900 (Canadian P/N 10953529).
6. The turn signal cancel cam assembly (4) onto the steering shaft assembly
7. The cam orientation plate (5)
3. Install the new bearing retainer onto the steering shaft assembly.
4. Compress the cam orientation plate using J 23653-SIR and J 42137 .
5. Firmly seat the bearing retainer into the groove on the steering shaft assembly.
6. Remove J 23653-SIR .
7. Install the SIR coil.
8. Enable the SIR system. Refer to SIR Disabling and Enabling .
Turn Signal Multifunction Switch Replacement
Turn Signal Multifunction Switch Replacement
Removal Procedure
Caution: Refer to SIR Caution .
1. Disable the SIR system. Refer to SIR Disabling and Enabling .
2. Remove the upper and lower trim covers.