Savana 2500 V8-6.6L DSL Turbo VIN 6 (2007)
8. Turn the wheel hub over and install the inner bearing cup.
9. Drive the inner bearing cup into the wheel hub using the J 24427 (2) and the J 8092 (1).
10. Install the inner bearing.
Important: The rubber outer sealing rings of the oil seal must be driven into the wheel hub first.
11. Install the new oil seal using the J 44420 (2) and the J 8092 (1).
12. Install the rotor, if necessary.
13. Apply a light coat of high melting point EP bearing lubricant to the axle housing spindle.