Savana 2500 V8-6.6L DSL Turbo VIN 6 (2007)
1. Install the flywheel to the crankshaft.
2. Install the flywheel washer to the flywheel with the beveled side facing the engine.
Notice: This component uses bolts with a preapplied molybdenum disulfide coating for thread lubrication. Do not remove the coating or use any
additional lubricant. Improperly lubricated threads will adversely affect the bolt torque and clamp load. Improper bolt torque and clamp load can
lead to engine damage.
3. Install NEW flywheel bolts until snug.
4. Install the J 44643 in order to lock the flywheel.
