Savana 2500 V8-6.6L DSL Turbo VIN 6 (2007)
3. Connect the electrical connector to the washer pump.
4. Remove the cap on the washer pump and connect the washer hose to the washer pump.
5. Position the washer solvent container into the locating holes in the chassis.
6. NOTE: Refer to Fastener Notice.
Install the washer solvent container with the bolt.
Tighten the bolt to 10 N.m (89 lb in).
7. Install the upper fender support bar.
8. Fill the washer solvent container.
9. Close the hood.