Savana 2500 2WD V6-4.3L VIN X (2004)
Parking Brake Cable: Service and Repair
Park Brake Cable Replacement - Front
Park Brake Cable Replacement - Front
Removal Procedure
1. Release the park brake.
2. Remove the park brake pedal.
3. Roll the carpet back to access the cable anchor nut and grommet.
4. Remove the cable anchor nut.
5. Remove the cable and grommet from the floor (1).
6. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
7. Disconnect the front cable (2) from the intermediate cable (3).
8. Remove the cable from the frame bracket by depressing the retaining tabs.
9. Remove the cable.
