Savana 2500 2WD V6-4.3L VIN X (2004)
Thermostat: Service and Repair
Thermostat Replacement (4.3L)
Removal Procedure
1. Remove the air cleaner and the duct assembly.
2. Partially drain the coolant.
3. Remove the coolant recovery reservoir.
4. Disconnect the radiator hose from the thermostat housing.
5. Remove the bolts attaching the thermostat housing to the thermostat.
6. Remove the thermostat housing.
7. Remove the thermostat.
8. Clean the gasket mating surfaces.
Installation Procedure
Notice: Refer to Coolant Addition Notice in Service Precautions.
1. Install the thermostat.