Savana 2500 2WD V6-4.3L VIN X (2004)
2. Install the thermostat housing to the intake manifold.
3. Notice: Refer to Fastener Notice in Service Precautions.
Install the bolts to the housing.
Tighten the bolts to 25 Nm (18 ft. lbs.).
4. Connect the radiator hose to the thermostat housing.
5. Install the coolant recovery reservoir.
6. Install the air cleaner and the duct.
7. Refill the cooling system.
8. Bleed the air from the cooling system.
9. Inspect the thermostat housing and the gasket for coolant leaks.
