Savana 2500 2WD V6-4.3L VIN X (2004)
15. Install the access plugs for the oil pan rear nuts.
16. Install the starter motor.
17. Install the bolt holding the bracket for the starter wiring harness and the transmission cooler pipes.
^
Tighten the bracket bolt to 9 Nm (80 inch lbs.).
18. Install the CKP sensor wiring harness in the retainer.
19. Install the oil filter adapter.
20. Install the oil filter and the oil pan drain plug.
21. Lower the vehicle.
22. Fill the crankcase with engine oil.
23. Connect the battery negative cable.