Savana 2500 2WD V6-4.3L VIN X (2004)
8. Remove the bolts and the balance shaft retainer.
Important: The balance shaft and the balance shaft front bearing are serviced only as a package. Do not remove the balance shaft front bearing
from the balance shaft.
9. Use a soft-faced hammer in order to remove the balance shaft from the engine block.
10. Clean and inspect the balance shaft.
Installation Procedure
Important: The balance shaft and the balance shaft front bearing are serviced only as an assembly. Do not remove the balance shaft front bearing
from the balance shaft.
1. Apply clean engine oil GM P/N 12345610 (Canadian P/N 993193) or equivalent to the balance shaft front bearing.
Caution: Refer to Safety Glasses Caution in Service Precautions.
