Savana 2500 2WD V6-4.3L VIN X (2004)
Important: Install the camshaft sprocket with the alignment mark at the 6 o'clock position.
5. Install the camshaft sprocket and the camshaft timing chain.
6. Look to ensure that the crankshaft sprocket is aligned at the 12 o'clock position and camshaft sprocket is aligned at the 6 o'clock position.
Notice: Refer to Fastener Notice in Service Precautions.
Important: Do not use a hammer to install the camshaft sprocket onto the camshaft. To do so may dislodge the expansion cup plug (camshaft
rear bearing hole).
7. Install camshaft sprocket bolts.
^
Tighten the camshaft sprocket bolts to 25 Nm (18 ft. lbs.).
