Savana 2500 2WD V6-4.3L VIN X (2004)
EGR Valve: Service and Repair
EXHAUST GAS RECIRCULATION (EGR) VALVE REPLACEMENT
REMOVAL PROCEDURE
IMPORTANT:
-
Do not try to disassemble the linear EGR valve. Service the EGR valve only as a complete assembly.
-
Carefully note the position of the linear EGR valve before removal. Do not rotate the linear EGR valve 180 degrees.
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
1. Disconnect the negative battery cable.
2. Remove the air cleaner assembly.
3. Remove the linear EGR harness connector.
4. Remove the bolts attaching the linear EGR valve to the flange.
NOTE: The Linear EGR valve is an electrical component. DO NOT soak in any liquid cleaner or solvent because damage may result.
