Savana 2500 2WD V6-4.3L VIN X (2004)
5. Remove the linear EGR valve.
6. Remove the flange gasket.
7. Clean the EGR valve gasket surface.
INSTALLATION PROCEDURE
1. Install the new flange gasket
2. Install the linear EGR valve.
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the bolts retaining the linear EGR valve to the flange.
Tighten
1. Tighten the bolts the first pass to 10 N.m (89 lb in).
2. Tighten the bolts the second pass to 25 N.m (18 lb ft).
