Savana 2500 2WD V6-4.3L VIN X (2004)
1. Install the fuel feed and return pipes and the fuel pipe retaining clips (1).
Tighten
Tighten the bolts to 12 N.m (106 lb in).
2. Connect the chassis fuel return pipe to the rear fuel return pipe.
3. Connect the fuel feed pipe to the fuel filter.
4. Install the fuel tank.
5. Lower the vehicle.
6. Refill the fuel tank.
7. Tighten the fuel filler cap.
8. Connect the negative battery cable.
9. Inspect for leaks:
9.1.
Turn ON the ignition for 2 seconds.
9.2.
Turn OFF the ignition for 10 seconds.
9.3.
Turn ON the ignition.
9.4.
Inspect for fuel leaks.
10. Install the engine cover.