Savana 2500 2WD V6-4.3L VIN X (2004)
1. Install the center seat belt lower belt (3) to the seat cushion frame.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the center seat belt retractor lower bolt (2).
Tighten
Tighten the center seat belt retractor lower bolt (2) to 52 N.m (38 lb ft).
3. Install the seat cushion cover (1).
4. Slide the center seat belt retractor into key hole slots in the seat back frame.
5. Carefully pull the rear seat back trim down enough to expose the center seat belt retractor bolt hole.
6. Install the center seat belt retractor bolt.
Tighten
Tighten the center seat belt retractor upper bolt to 52 N.m (38 lb ft).
