Savana 2500 2WD V8-5.3L VIN T (2004)
Air Door Actuator / Motor: Service and Repair
Air Temperature Actuator Replacement
AIR TEMPERATURE ACTUATOR REPLACEMENT
REMOVAL PROCEDURE
1. Disconnect the air temperature actuator electrical connector.
2. Remove the air temperature actuator retaining screws.
3. Remove the air temperature actuator (1) from the heater assembly (2).
INSTALLATION PROCEDURE
1. Install the air temperature actuator (1) to the heater assembly (2).
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the air temperature actuator retaining screws.
Tighten
Tighten the screws to 1.9 N.m (17 lb in).
3. Connect the air temperature actuator electrical connector.
