Savana 2500 2WD V8-5.3L VIN T (2004)
6. Pull the cigar lighter housing (3) and the cigar lighter retainer (2) out of the trim plate.
7. Disconnect the electrical connector (1) from the housing.
8. Remove the retainer from the housing.
INSTALLATION PROCEDURE
1. Install the cigar lighter retainer (2) to the trim plate by pressing the retainer into place until fully seated.
2. Connect the electrical connector (1) to the housing.
3. Align the housing key to the slot in the retainer ring (2).
4. Press the housing into place until the housing is fully seated.
5. Install the cigar lighter fuse.
