Savana 2500 2WD V8-5.3L VIN T (2004)
1. Install the battery negative cable to the vehicle.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Connect the battery negative cable lead to the engine block.
Tighten
Tighten the bolt that retains the battery negative cable lead to the engine block to 25 N.m (18 lb ft).
3. Connect the battery negative cable lead to the inner fender panel.
Tighten
Tighten the nut that retains the battery negative cable to the inner fender well to 10 N.m (89 lb in).
