Savana 2500 2WD V8-5.3L VIN T (2004)
Positive: Service and Repair
Battery Positive Cable Replacement
BATTERY POSITIVE CABLE REPLACEMENT
REMOVAL PROCEDURE
1. Remove the bolt retaining the coolant recovery reservoir or surge tank.
2. Move the coolant recovery reservoir or the surge tank aside.
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
3. Disconnect the battery negative cable from the battery.
4. Disconnect the battery positive cable from the battery.
5. If equipped with the 4.8L, 5.3L or 6.0L engine, disconnect the positive lead to the junction block.
6. Raise the vehicle. Refer to Vehicle Lifting.
