Savana 2500 2WD V8-5.3L VIN T (2004)
Idler Arm: Service and Repair
Idler Arm Replacement
-
Tools Required
-
J 43631 Ball Joint Remover
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
2. Remove the idler arm to relay rod retaining nut. Discard the nut.
3. Disconnect the idler arm from the relay rod using the J 43631.
4. Remove the idler arm to frame mounting bolts.
5. Remove the idler arm from the vehicle.
Installation Procedure