Savana 2500 2WD V8-5.3L VIN T (2004)
4. Remove the shock absorber lower mounting bolts.
5. Remove the shock absorber from the vehicle.
Installation Procedure
1. Install the shock absorber to the vehicle.
2. Align the shock absorber with the mounting holes in the lower control arm.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the shock absorber lower mounting bolts.
-
Tighten the bolts to 25 Nm (18 ft. lbs.).
4. Install the shock absorber upper retaining nut and bushing.
-
Tighten the nut to 20 Nm (15 ft. lbs.).
5. Remove the safety stands.
6. Lower the vehicle.
7. Dispose of the shock absorber.
Shock Absorber Disposal
Shock Absorber Disposal