Savana 2500 2WD V8-5.3L VIN T (2004)
Align the holes in the differential case to the bolts holes in the ring gear.
Important: The ring gear bolts have right-hand threads.
3. Install the new ring gear bolts.
Hand start each bolt to ensure that the ring gear is properly installed to the differential case.
Notice: Refer to Fastener Notice in Service Precautions.
4. Tighten the new ring gear bolts. Tighten the ring gear bolts alternately and in stages, gradually pulling the ring gear onto the differential case.
Tighten the new ring gear bolts to 177 Nm (131 ft. lbs.).
5. Install the differential assembly.
6. Fill the axle with lubricant. Use the proper fluid.
7. Lower the vehicle.
